Yes—many running shoes can be machine-washed, but only the right kind. Mesh, knit, and most synthetic trainers with removable insoles are usually the safest choice. Leather, suede, waterproof-membrane shoes, and pairs with lifting glue or cracked foam should be hand-cleaned instead. The safe version is to prep the shoes first, wash them on a gentle cool cycle with minimal detergent, and air-dry them slowly so the shape and glue stay intact.
Start here: are your running shoes machine-washable?
Yes, some running shoes are machine-washable, but materials and condition matter more than the brand name. The best candidates are everyday mesh trainers, knit uppers, and other synthetic running shoes that are dirty but still structurally sound.
The ones I would leave out of the washer are leather, suede, nubuck, shoes with a waterproof membrane if the maker says not to machine wash them, and any pair that already has separating glue or damaged foam.
A quick decision check:
- Usually safe to machine-wash: mesh or knit trainers, synthetic running shoes, shoes with removable insoles, lightly to moderately soiled pairs.
- Hand-clean instead: leather, suede, nubuck, waterproof or membrane shoes when the maker warns against machine washing, shoes with peeling overlays, lifted soles, cracked foam, or fragile decorative parts.
- Stop and don’t machine-wash them if the shoe already feels weak, the heel counter is peeling, or the sole is starting to separate.
This is less about the fabric alone and more about how the whole shoe is built. Heat, soaking, and tumbling can weaken adhesive, distort foam, and change the fit. If the pair is already failing, the washer can push it past the point where it still wears normally.
What you need before you start
You do not need special gear. A few simple items make the wash safer and less messy, though.
- Mild liquid detergent
- Laundry bag or old pillowcase with a secure closure
- 2 to 4 towels for cushioning the load
- Soft brush or old toothbrush
- Drying rack or a clean spot with airflow
Avoid bleach, fabric softener, and heavy-duty stain boosters unless the shoe maker specifically allows them. Those products can be rough on adhesives, foam, and technical finishes. If the care label or the maker’s current instructions say to use something different, follow that for the exact model instead of general laundry advice.
Prep the shoes first
Take out the laces and, if the insoles lift out easily, remove them too. Then brush off loose dirt, grit, and dried mud before the shoes go anywhere near the washer. That keeps the drum cleaner and helps prevent grit from grinding into the upper.
- Tap the soles together outside to knock off loose soil.
- Brush the outsole, midsole, and upper gently with a dry or slightly damp soft brush.
- Remove the laces.
- Pull out the insoles if they are removable and not glued in place.
- Loosen any Velcro straps, tongue loops, or tucked edges so water can reach them.
If you skip the pre-clean, you can end up with muddy seams and a wash that only moves dirt around. A few minutes here usually saves you from re-washing later.
Set up the washer load the safe way
Put the shoes in a laundry bag or pillowcase, then add a few towels to cushion the load. The towels help reduce banging and keep the shoes from slamming around in the drum. The goal is a padded, controlled wash, not a loose tumble.
- Place each shoe in a separate laundry bag if that fits better.
- Zip or tie the bag so the shoes stay contained.
- Add the shoes and a few towels to the washer.
- Leave enough room for the shoes to move and rinse; do not pack the drum full.
If you crowd the washer, the shoes may come out still dirty and detergent can linger in the fabric. Too many towels create the same problem, just with more weight.
Choose the right cycle and detergent
Use a gentle cycle with cool water and a low spin setting if your machine lets you choose it. Mild liquid detergent is the safest choice for most running shoes because it rinses more cleanly than powder and is usually less harsh than specialty cleaners made for heavy laundry.
- Select the gentle or delicate cycle.
- Choose cool water first; lukewarm is the upper end only if the shoe’s care label or current maker instructions allow it.
- Keep spin low if the washer gives you that control.
- Add only a small amount of mild liquid detergent.
- Skip bleach, fabric softener, and strong additives.
Cool water is the safest default because it is less likely to loosen glue or change the feel of foam. I would only move up to lukewarm if the shoe’s own instructions say it is fine. Hot water is the one setting most likely to create trouble.
Wash the laces and insoles separately
Laces and insoles need different treatment, and this is where people often rush. Laces are simple. Insoles hold odor more easily and can warp if they stay wet too long.
For laces:
- Put them in a small mesh bag or pillowcase.
- Wash them with the shoes or with a normal load on a gentle cycle.
- Let them air-dry completely before relacing.
For insoles:
- If they are removable foam or fabric insoles, wipe them with a damp cloth and a little mild detergent.
- Rinse lightly if needed, but do not soak them unless the maker says it is fine.
- Press out moisture with a towel and let them air-dry flat.
If the insoles still smell after a light clean, that does not automatically mean the shoe wash failed. Often the insole is the source of the odor, and it needs more drying time or a second hand-cleaning pass rather than another full machine cycle.
Dry them the right way
Air-dry only. Do not put running shoes in a dryer, near a radiator, on top of a vent, or in direct high heat. Heat can warp foam, shrink some materials, and weaken glue before you notice the damage.
- Remove the shoes from the washer as soon as the cycle ends.
- Take out the insoles if they were left in.
- Stuff the toe box loosely with dry paper towels or clean dry cloths to help hold shape and pull out moisture.
- Place the shoes on a drying rack or in a spot with good airflow.
- Change the stuffing if it gets damp.
Do not pack the shoes tightly with stuffing. That can trap moisture and leave odor inside the shoe. Thick knit uppers and cushioned trainers can take longer than people expect, so let them dry all the way through before you wear them again.
How to tell it worked
A good wash leaves the shoes cleaner, less smelly, and still shaped like the pair you started with. The stitching should still look intact, the outsole should stay attached, and the upper should not feel stiff, warped, or sticky.
Check these once the shoes are fully dry:
- The odor is reduced, not just covered by detergent.
- Dirt is gone from the mesh, seams, and outsole edges.
- The glue lines still look firm.
- The foam has not collapsed or crumbled.
- The shoes sit flat and match each other in shape.
If they still smell or still look dirty, clean the problem spots by hand instead of running another full wash right away. If glue starts lifting, the midsole looks split, or the upper begins to separate, stop machine washing that pair. That usually means the shoe needs a different fix, not another spin cycle.
When to stop and hand-clean instead
Stop before washing if the shoe has fragile materials or visible failure. Machine washing is a bad idea when the upper is leather or suede, the shoe has a waterproof membrane that the maker says not to machine wash, the adhesive already looks weak, or there is a lot of decorative or structural glue holding the shoe together.
Hand-clean instead if you see any of these:
- Peeling overlays or lifted soles
- Cracked foam midsole
- Non-removable insoles that hold odor but cannot take soaking
- Delicate knit or mesh with holes already forming
- A care label that warns against machine washing
If the maker’s care instructions conflict with general laundry advice, follow the maker’s instructions for that model. Shoe construction varies a lot, even within the same brand, and current product guidance is the source that matters most for the exact pair you own.
Frequently Asked Questions
Can all running shoes go in the washing machine?
No. Mesh and synthetic trainers often can, but leather, suede, waterproof, or already-damaged shoes usually should be hand-cleaned. The safest check is the shoe’s care label or the maker’s current instructions for that exact model.
Should I use cold or warm water?
Cold is the safest default for most running shoes because it is gentler on glue and foam. Lukewarm water can be fine if the care label allows it, but avoid hot water unless the maker specifically says it is safe.
Can I put running shoes in the dryer?
No. Heat can warp foam, shrink materials, and weaken glue. Air-dry them instead, with the insoles out if possible and the shoes stuffed loosely so they keep their shape while they dry.